Go to homepage

Measuring Point Change-over Switch Type MUM16

Bild 1 Messstellenumschalter Typ MUM16
Measuring Point Change-over Switch Type MUM16
Bild 1 Messstellenumschalter Typ MUM16
Measuring Point Change-over Switch Type MUM16

Price after log in

Ready to ship today,
Delivery time appr. 1-3 workdays

Article number: T236035
Share product

Measuring point change-over switches allow the connection of up to 16 measuring points to 1 measuring device, e.g. an analog input of a PLC.

The inputs can be selected with a BCD-Code. Manual selection can be made with a code-switch. 

In automatic mode, the inputs are polled (tact-time adjustabe) and thus be displayed in succession. When using a measuring point change-over switch, only 1 measuring input is needed to collect multiple values.
Especially with slowly changing signals like temperatures, measuring every other second is enough. Expensive inputs for Pt100 or 0-10 V/0-20 mA at PLCs can be saved.

With the MUM16, alternatively 16 measuring points with common ground or 8 measuring points with separated ground can be switched.

  • PLC-compatibel. Channelselection over 4 bit parallel (24 V), e.g. PLC or by a code-switch
  • Optional switching + or -
  • Enable-input for using multiple MUM in parallel
  • Monitoring of up to 16 signals for one limit with only 1 limit switch
  • 16 channels (0/4 ... 20 mA, 0 ... 10V, Pt 100) with common ground
  • 8 double-channels (= Pt 100/ 3-wire and thermocouples)
  • Simple configuration with 3 DIP-switches
  • Supply AC/DC 24-240 V
  • LED-display for selected channel
  • Tact-time in automatic mode adjustable 0,5 ... 10 s
  • plug-in terminals
  • Housing for mounting in switchgear cabinets or fuse boxes, 140 mm wide, mounting height 55 mm
Input/ Measured parameter: Standard signals 0/4-20 mA, 0-10 V, Pt 100
Outputs: Analog outputs 0/4-20 mA, 0-10 V
Design: Mount in switchgear cabinet
Approval: EU-Declaration of Conformity
Extras: mehr wie 3 Sensoreingänge, Temperature sensors

Accessories

Bild 1 ER8 Einbaurahmen V8 bestehend aus:
Front Mounting Kit Type ER
Version: ER8, Housing V8, 8 TE
You found a device in that meets your requirements and you want to install it in a control panel or in the door of a control cabinet?With the installation frame of the ER series, this is possible for all ZIEHL devices in housings V4, V6 and V8 (width 70/105/140 mm).Enclosed by a high-quality frame made of anodized aluminum, all displays can be read outside the control cabinet. Switches, buttons and joystick can be operated. 

Alternativ

Bild 1 Messstellenumschalter Typ MUM8
Measuring Point Change-over Switch Type MUM8
Measuring point change-over switches allow the connection of up to 16 measuring points to 1 measuring device, e.g. an analog input of a PLC.The inputs can be selected with a BCD-Code. Manual selection can be made with a code-switch. In automatic mode, the inputs are polled (tact-time adjustabe) and thus be displayed in succession. When using a measuring point change-over switch, only 1 measuring input is needed to collect multiple values.Especially with slowly changing signals like temperatures, measuring every other second is enough. Expensive inputs for Pt100 or 0-10 V/0-20 mA at PLCs can be saved.With the MUM8, alternatively 8 measuring points with common ground or 4 measuring points with separated ground can be switched.PLC-compatibel. Channelselection over 3 bit parallel (24 V), e.g. PLC or by a code switchOptional switching + or -8 channels (0/4 ... 20 mA, 0 ... 10V, Pt 100) with common ground4 double-channels (= Pt 100/3-wire and thermocouples) Supply-voltage AC 230 V or DC 24 VLED-display for selected channelClock time in automatic mode adjustable 0,5 ... 10 splug-in terminals