Current-Relay STW12
Current Relay for AC-Detection, 12-channel, 12 open collector outputs, Single evaluation and OR-Circuit, open printed circuit board
Product description
The current relay STW12 monitors the current flow yes/no of up to 12 alternating-current circuits. If there is an AC-current of ≥1 A through a connected transformer STWA 1, the according output transistor switches and the yellow LED lights up.
All the OR inputs are linked at the same time. If a current is identified in at least one of the monitored current circuits, a relay (1 changeover contact) picks up.
The STW12 is installed at an open printed circuit board. The lower part can be used for snapfastening on a 35 mm DIN-rail or for screw fastening (option). The supply voltage is DC 24. This voltage can be used at the same time for inquiry of the output transistors. When requesting the outputs in 2 groups in multiplex operation, only 8 I/Os of the PLC are needed.
- 12 inputs (for transformer STWA1)
- 2 of these inputs with adjustable switching threshold AC 0,5...5 AA
- 12 outputs (Open Collector) max. DC 40 V/40 mA
- relay OR-linked (of all 12 inputs)
- LED displays (1/channel)
- Multiplex operation possible
Applications
The current relay STW12 is used where AC-current yes/no has to be evaluated, however, the exact value of the current is not relevant. Examples are the control of machines in suction plants or monitoring of the mode of operation of loads (on, off or damaged). The STW12 is suitable in particular for being used in connection with a PLC.
Technical Data
Power supply Us
DC 20 - 30 V, < 2 VA
Function
12-channel single/OR
Transformer input
1…12, type STWA 1
Overload cap.continous/max 10s
100 A / 300 A
Switching points E1, E2
adjustable, AC 0,5...5 A
Tolerance
± 20%
Switching points E3...E12
on ≤ AC 1 A
off ≥ AC 0,3 A
Switch-off delay
10 sec.
Switch-on delay
approx. 0,5 sec.
Output relay
1 CO, 12 x Open-Collector
Type of contact
type 2 see general technical informations
Open Collector
max. DC 40 V/40 mA
Testing conditions
see general technical informations
rated ambient temperature range
-20°C…+55°C
Dimensions H x B x T
design V 6: 90 x 105 x 32 [mm], 37-pole
Attachment
on 35 mm DIN rail according to DIN EN 50 022 or with screws M4 (option)
Protection housing / terminals
IP 30 / IP 20
Weight
approx. 135 g
CAD Data
Certificates
FAQ / Product videos