Pt 100-Temperature relays Type TR1200IP
Ready to ship today,
Delivery time appr. 1-3 workdays
Do you have a question?
Temperature-relays TR1200IP measure the temperature of up to 12 sensors within 199...+850 °C and provide the data at an ethernet interface for external evaluation. With its universal power-supply AC/DC 24-240 V it can be connected to all common supply-voltages. Actual measured values and stored min- and max-values can be displayed in a normal browser.
At the ethernet interface the following protocols are available:
- Modbus TCP
- ZIEHL RTD
- IEC61850 (GOOSE) ATTENTION: for part-no. T224078 only
The TR1200IP itself does not monitor temperatures for limits. For direct monitoring of temperatures our devices with alarms and output relays are recommended.
It is used where temperatures of many sensors Pt100 shall be measured and transmitted via ethernet.
Applications are e.g. monitoring of:
- Motors and generators (windings, bearings, coolant, ambient temperature)
- Transformers (windings, core, ambient temperature)
- Maschines, plants and equipment
Sensors and displays:
- 12 inputs for sensors Pt 100 (RTD)
- Connection in 2- or 3-wire
- unneeded inputs can be switched off
- Monitoring of sensors for short-circuit an interrupt
- 3-digit-display for temperature
- LEDs for assigning the measured value, error, state of relay and interface
Interface:
- 10 MBit/s Ethernet
- supports IEC 61850 GOOSE
- Protocol ZIEHL-standard RTD or Modbus TCP
- Protocol details see www.ziehl.de - operating manuals
| Product group: | Temperature Measurement |
|---|---|
| Input/ Measured parameter: | Pt 100 |
| Design: | Mount in switchgear cabinet, Mount in circuit breaker box |
| Approval: | UL/CSA, EU / UKCA-Declaration of Conformity, UKCA |
| Extras: | Temperature relays |
| Applications: | Protection of transformers |
Technical specifications
CAD Data
Applications / Hints
Updates
Certificates
FAQ / Product videos
Accessories
You found a device in that meets your requirements and you want to install it in a control panel or in the door of a control cabinet?With the installation frame of the ER series, this is possible for all ZIEHL devices in housings V4, V6 and V8 (width 70/105/140 mm).Enclosed by a high-quality frame made of anodized aluminum, all displays can be read outside the control cabinet. Switches, buttons and joystick can be operated.
Alternative
12-channel Temperature-Relay for Sensors Pt100 (RTD)Temperature relays TR1200 measure the temperature of up to 12 sensors within 199...+850°C and provide the data at an interface RS485 for external evaluation. With its universal power-supply AC/DC 24-240 V it can be connected to all common supply voltages.The TR1200 provides the data as Modbus-RTU-protocol or according to the ZIEHL-standard. With protocol ZIEHL standard it can replace 2 ZIEHL TR600 relays.TR1200 itself does not monitor temperatures for limits. For direct monitoring of temperatures our devices with alarms and output relays are recommended.It is used where temperatures of many sensors Pt100 shall be evaluated by a device with input RS485.Applications are e.g. monitoring ofmotors and generators (windings, bearings, coolant, ambient temperature)transformers (windings, core, ambient temperature)machines, plants and equenSensors and Displays12 inputs for sensors Pt 100 (RTD)Connection 2- or 3-wireunneeded inputs can be switched offmonitoring of sensors for short-circuit an interrupte-digit-display for temperatureLEDs for assigning the measured value, error, state of relay and interfaceInterfaces:Interface RS485(protocols ZIEHL standard and modbus RTU)Baud rate (4800/9600/19200) and Parity-Bitselectable protocols see operating manual on www.ziehl.deRelay for error (1 co-contract) for sensor error and operational failure
