Universal Relay Box Type URB40

You found a device in that meets your requirements and you want to install it in a control panel or in the door of a control cabinet?With the installation frame of the ER series, this is possible for all ZIEHL devices in housings V4, V6 and V8 (width 70/105/140 mm).Enclosed by a high-quality frame made of anodized aluminum, all displays can be read outside the control cabinet. Switches, buttons and joystick can be operated. 

Web-IO universal limit value relay with Ethernet interface, built-in web server and 4 inputs for temperature sensors or other analog signals. The UR420IP can be connected to the internet or an intranet and operated via TCP/IP from a normal PC with a suitable browser.The device can simultaneously evaluate and monitor up to 4 different input signals. Each of the 2 output relays can be assigned up to 4 limit values, one per input. If a limit value is reached, an alarm is triggered and a relay switches. Example: Alarm 1 is activated when a temperature is exceeded at sensor input 3 (e.g. Pt 100) or the signal from a pressure transmitter (e.g. 4-20 mA) at input 5 falls below a limit value. The device also has an RS485 interface (Modbus RTU) that can be used to connect current sensors type STWA4MH and the relay box type URB40.Accessory: Installation frame ER6 for panel mount ApplicationsThe UR420IP is used where one or more of the following features a required:monitor up to 4 different analogue measured values and transfer them to the InternetMeasured value query and remote maintenance via intranet/internet Discover the difference between our UR-series! Feature UR420IP UR840IP Sensors PT100, PT1000, KTY83, KTY84, thermocouples, 0-10V, 0/4-20mA PT100, PT1000, KTY83, KTY84, thermocouples, 0-10V, 0/4-20mA Sensor inputs 4 8 Digital inputs 2 4 Outputs 2x alarm relays 4x alarm relays, 1x analog Alarm types Sensor-specific thresholds, difference, rate of change temperature, 2 out of X Sensor-specific thresholds, difference, rate of change temperature, 2 out of X Virtual sensors 4 8 Display Display, LED Display, LED Configuration Joystick, web interface Joystick, web interface Network / Communication RS485, Ethernet RS485, Ethernet Other functions On/off delay, simulation, expansion with URB or STWA4MH On/off delay, simulation, data visualization, expansion with URB or STWA4MH Housing V6 V8 Applications Measurement monitoring and control Measurement monitoring and control

Web-IO universal limit value relay with Ethernet interface, built-in web server and 8 inputs for temperature sensors or other analog signals. The UR840IP can be connected to the internet or an intranet and operated via TCP/IP from a normal PC with a suitable browser.The device can simultaneously evaluate and monitor up to 8 different input signals. Each of the 4 output relays can be assigned up to 8 limit values, one per input. If a limit value is reached, an alarm is triggered and a relay switches. Example: Alarm 1 is activated when a temperature is exceeded at sensor input 3 (e.g. Pt 100) or the signal from a pressure transmitter (e.g. 4-20 mA) at input 5 falls below a limit value. The device also has an RS485 interface (Modbus RTU) that can be used to connect current sensors type STWA4MH and the relay box type URB40.NEW: Data visualization in the web interface.Accessory: Installation frame ER8 for panel mount ApplicationsThe UR840IP is used where one or more of the following features a required:The UR840IP is used to advantage wherever the following features are requiredmonitor up to 8 different analogue measured values and transfer them to the InternetMeasured value query and remote maintenance via intranet/internet Discover the difference between our UR series! Feature UR420IP UR840IP Sensors PT100, PT1000, KTY83, KTY84, thermocouples, 0-10V, 0/4-20mA PT100, PT1000, KTY83, KTY84, thermocouples, 0-10V, 0/4-20mA Sensor inputs 4 8 Digital inputs 2 4 Outputs 2x alarm relays 4x alarm relays, 1x analog Alarm types Sensor-specific thresholds, difference, rate of change temperature, 2 out of X Sensor-specific thresholds, difference, rate of change temperature, 2 out of X Virtual sensors 4 8 Display Display, LED Display, LED Configuration Joystick, web interface Joystick, web interface Network / Communication RS485, Ethernet RS485, Ethernet Other functions On/off delay, simulation, expansion with URB or STWA4MH On/off delay, simulation, data visualization, expansion with URB or STWA4MH Housing V6 V8 Applications Measurement monitoring and control Measurement monitoring and control

NEW: Expected to be available from 3rd quarter of 2026 Web-IO universal limit value relay with Ethernet interface, built-in web server and 2 inputs for temperature sensors or other analog signals. The UR220IP can be operated via NFC or from a normal PC with a suitable browser. In addition, all values and statuses can be queried via Modbus TCP. The device can simultaneously evaluate and monitor up to 2 different input signals. Each of the 2 output relays can be assigned up to 2 limit values, one per input. If a limit value is reached, an alarm is triggered and a relay switches. The device has an analog current and an analog voltage output. Relays can also be switched on or off via the digital input.Example: Alarm 1 is activated when a temperature is exceeded at sensor input 1 (e.g. Pt 100) or the signal from a pressure transmitter (e.g. 4-20 mA) at input 2 falls below a limit value. Accessory: Installation frame ER4 for panel mount ApplicationsThe UR220IP is used where one or more of the following features a required:Monitor up to 2 different analogue measured valuesAccess via web browser to the local networkMonitoring of Pt100, Pt1000, PTC, KTY, analog measured values and resistance measurements