Coupling Device for Voltage Type VG1200
Ready to ship today,
Delivery time appr. 1-3 workdays
Do you have a question?
In order to achieve higher efficiencies and to reduce line losses, inverters with a higher output voltage than the usual 3AC 400 V are often used in large on-site generation systems.
So that the grid and system protection can monitor this high voltage, it must be reduced. This is usually done with voltage converters. With the VG1200 coupling device, an ohmic voltage divider is available that takes on this task. In conjunction with the VG1200 coupling device, the UFR1002IP can measure voltages of up to 1200 V. The display in the UFR1002IP is scalable. This means that the voltages at the input of the VG1200 are displayed and the limits for protection against over- and undervoltage are set accordingly. Both devices together meet the requirements of VDE-AR-N 4110 (feeding into the medium-voltage grid).
- Measuring of voltage up to 1200 V
- Measuring tolerance = 1,2% of nominal voltage (of UFR1002IP)
- No voltage converters required
- Display of the correct voltage on the UFR1002IP (scalable)
- No supply voltage required
- Housing V6, 105 mm wide
| Product group: | Mains Monitoring, New Products |
|---|---|
| Input/ Measured parameter: | Voltage |
| Design: | Mount in switchgear cabinet, Mount in circuit breaker box |
| Approval: | EAAV / NELEV, UKCA, Extras |
| Applications: | Plants for Generation of own energy |
Technical specifications
CAD Data
Applications / Hints
Certificates
FAQ / Product videos
Accessories
You found a device in that meets your requirements and you want to install it in a control panel or in the door of a control cabinet?With the installation frame of the ER series, this is possible for all ZIEHL devices in housings V4, V6 and V8 (width 70/105/140 mm).Enclosed by a high-quality frame made of anodized aluminum, all displays can be read outside the control cabinet. Switches, buttons and joystick can be operated.
